The Compute Module 3 Lite product is the same as the Raspberry Pi Compute Module 3 except the eMMC Flash is not fitted, and the SD/eMMC interface pins are available for the user to connect their own SD/eMMC device The Compute Module 3 Lite contains the following components contained within a 200 pin SODIMM design:
- Broadcom BCM2837 processor
- 1Gbyte LPDDR2 RAM
- 35u hard gold plated IO Pins
(N.B. when operating with the IO Board, an SD card with a suitable image must be connected to the IO board for the system to work)
Raspberry Pi Compute Module Lite
We have 10 units in our Sydney Warehouse available for immediate dispatch.
| Raspberry Pi Model Compatibility | ||
|---|---|---|
| RP4 |
|
Requires other products to use with Raspberry Pi 4 Model B |
| RP3A+ |
|
Requires other products to use with Raspberry Pi 3 Model A+ |
| RP3B+ |
|
Requires other products to use with Raspberry Pi 3 Model B+ |
| RP3B |
|
Requires other products to use with Raspberry Pi 3 Model B |
| RP2B |
|
Requires other products to use with Raspberry Pi 2 Model B |
| RP1B+ |
|
Requires other products to use with Raspberry Pi 1 Model B+ |
| RP1A+ |
|
Requires other products to use with Raspberry Pi 1 Model A+ |
| RP0W |
|
Requires other products to use with Raspberry Pi Zero W |
| RP0 |
|
Requires other products to use with Raspberry Pi Zero |
| RPCM3+ |
|
Requires other products to use with Raspberry Pi Compute Module 3+ |
Welcome from Marcus Schappi,
Little Bird's Cofounder
Thanks for visiting PiAustralia!
I know that navigating the world of electronics and software can be challenging, but don't worry we're here to help!
If you ever need a hand, please contact me directly at help@littlebird.com.au or on Twitter at @schappi.
Thanks again and all the best,
Marcus