Use this WS2812B LED strip to program 5 smart RGB LEDs.
This chain-able design means you can hook up several modules to increase the length of your project. You are able to use just one micro-controller pin (like on Arduino, Micro:bit or Pico) to control as many as you can chain together! Each LED is addressable as it has the driver chip inside the LED. Each one has 18mA constant current drive so the colour will be very consistent even if the voltage varies.
Requires 5VDC
This can be used with Adafruit NeoPixel Libraries.
Little Bird Lorikeet WS2812B Rainbow Board
We have 104 units in our Sydney Warehouse available for immediate dispatch.
| Raspberry Pi Model Compatibility | ||
|---|---|---|
| RP4 |
|
Doesn't with Raspberry Pi 4 Model B |
| RP3A+ |
|
Doesn't with Raspberry Pi 3 Model A+ |
| RP3B+ |
|
Doesn't with Raspberry Pi 3 Model B+ |
| RP3B |
|
Doesn't with Raspberry Pi 3 Model B |
| RP2B |
|
Doesn't with Raspberry Pi 2 Model B |
| RP1B+ |
|
Doesn't with Raspberry Pi 1 Model B+ |
| RP1A+ |
|
Doesn't with Raspberry Pi 1 Model A+ |
| RP0W |
|
Doesn't with Raspberry Pi Zero W |
| RP0 |
|
Doesn't with Raspberry Pi Zero |
| RPCM3+ |
|
Doesn't with Raspberry Pi Compute Module 3+ |
Welcome from Marcus Schappi,
Little Bird's Cofounder
Thanks for visiting PiAustralia!
I know that navigating the world of electronics and software can be challenging, but don't worry we're here to help!
If you ever need a hand, please contact me directly at help@littlebird.com.au or on Twitter at @schappi.
Thanks again and all the best,
Marcus