Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries.
The batteries come pre-attached with a genuine 2-pin 25mm JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable won't snag or get stuck in a matching JST jack, they click in and out smoothly.
The size of this battery was customized so that it tucks perfectly between the headers on a Feather, and you can even sandwich it between a Feather and FeatherWing. As seen above, its a perfect fit for a Feather Huzzah ESP8266 and an Adafruit FeatherWing OLED! Just remember to use the normal-height female headers or stacking headers, not the shorty ones.
The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 400mA or less. We suggest our Micro Lipo charger, which has a 100mA default rate. You can also set the Micro Lipo to 400mA rate for a faster charge. All of our Feathers charge at a safe rate.
Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1 C or even less - 100 to 400mA is a good rate, and available from any USB port if using a USB-powered charger
NOTE: We have a slow shipping time on orders of 1 or more battery as we are limited by how many we can import in a single shipment. Please contact us for alternatives which we carry local stock of.
Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.
Pi Australia is operated by Little Bird, and we go to great lengths to ship your orders, often within minutes.
You can view shipping options and pricing at checkout without logging in.
For orders over 500g (such as bulky items), shipping may cost more than the initial estimate.
We deliver across Australia, and here are the options (based on your location; view them on the cart page):
- Standard Post: Starting at $7 (6+ business days, with tracking)
- Express Post: Starting at $11 (2+ business days, with tracking)
- Same Day Delivery: Available for Sydney orders.
- Non-metro WA, NT, SA, and TAS: May take an additional 2+ days.
Note: Some items, such as LiPo batteries, cannot be shipped by air. Express Post and international shipping won’t be available if these are included in your cart.
For international orders, here are rates for shipping to New Zealand (rates differ for other countries):
- Pack and Track: Starting at $12 (3+ days, with tracking)
- Express International: Starting at $16 (2-5 days, with tracking)
Shipping for heavier orders will depend on their weight.
Our address:
Little Bird
Unit 13,
8-12 Leighton Place
Hornsby, NSW 2077,
Australia
1300 240 817
For queries like whether we accept purchase orders (yes we sure do!) or if our prices include GST (they all do!), please hit us up via phone on 1300 240 817 or email us team@littlebird.com.au . We’re happy to assist with any product questions!
Sherpa Delivery Estimates
| Location | Estimated Delivery Time |
|---|---|
| Sydney Metro | Same Day |
Auspost Express Post Delivery Estimates
| Location | Estimated Delivery Time |
|---|---|
| Canberra | 1 Day |
| Sydney Metro | 1 Day |
| NSW Outer Metro | 1 Day |
| NSW VIC Border | 2 Days |
| NSW Rural | 2-3 Days |
| Melbourne Metro | 1 Day |
| VIC Other | 2-3 Days |
| VIC Rural | 2-3 Days |
| Brisbane Metro | 1 Day |
| QLD Gold Coast | 1 Day |
| QLD Outer Metro | 1-2 Days |
| QLD Other | 2-3 Days |
| QLD Rural | 3-4 Days |
| Adelaide Metro | 1 Day |
| SA Other | 2-3 Days |
| SA Rural | 3-4 Days |
| Perth CBD | 1 Day |
| Perth Metro | 2 Days |
| WA Other | 3-4 Days |
| WA Rural | 4-6 Days |
| Tas Metro | 1 Day |
| Tas Devonport | 1-2 Days |
| Tas Country | 2-3 Days |
| Tas Remote | 4 Days |
| Darwin & Katherine | 3-4 Days |
| Alice Springs | 4 Days |
| NT Rural | 4-5 Days |
Auspost Parcel Post Delivery Estimates
| Location | Estimated Delivery Time |
|---|---|
| Sydney Metro | 2 Days |
| NSW Country | 3-4 Days |
| Canberra | 2 Days |
| Melbourne Metro | 2-3 Days |
| VIC Country | 3-5 Days |
| Brisbane Metro | 2-3 Days |
| QLD Near Country | 2-4 Days |
| QLD Far Country | 3-5 Days |
| Far North QLD | 5-7 Days |
| Far North QLD Remote | 7-12 Days |
| Adelaide Metro | 2-4 Days |
| SA Country | 2-5 Days |
| Perth Metro | 4-5 Days |
| WA Country | 5-8 Days |
| WA Country Far | 7-10 Days |
| Tasmania | 3-5 Days |
| Tasmania Remote | 4-8 Days |
| Darwin | 4-7 Days |
| Alice Springs | 6-9 Days |
| NT Other | 12-13 Days |
Buy with Confidence
We're Australia's only Raspberry Pi approved reseller in Sydney, Australia.
How do you Ship your Raspberry Pis?
We ship via Australia Post eParcel from our Sydney warehouse.
Australia Post picks up from us daily.
All shipping methods we use have tracking.
Do you ship from Sydney, Australia?
All our products ship from our warehouse in Sydney, Australia.
What payment methods do you accept?
We accept all major credit cards, Apple Pay, Google Pay and PayPal.
We also accept purchase orders from educational and government institutions on 30-day terms.
You're automatically approved if you're a school, university, or state or federal government department or agency.
What is your return, exchange and warranty policy?
Returns
We accept returns for faulty products, but will first work with you to help get your Raspberry Pi working again.
99% of the time there it is not the Raspberry Pi that is faulty.
If you need help, reach out to us on help@littlebird.com.au.
Change of Mind
We are happy to accept a return for a "change of mind", however, you will need to cover the cost of any merchant fees associated with the return. Goods need to be in an "as new" state.
What's the warranty on your Raspberry Pis?
You can have peace of mind knowing that Raspberry Pi is backed by a 1-year warranty, and thanks to rigorous quality assurance testing in the UK factory, you can be sure that your Raspberry Pi will stay in good working condition.
How long does shipping and delivery take?
At our Sydney, Australia warehouse, we provide fast and reliable shipping. To go even further, we have created our own Raspberry Pi powered Robot called Bishop.
How long does delivery take?
Australia Post picks up from us daily. If you're within the Australia Post next day network you can usually expect your order to arrive the next day if ordered with Express Post before 2pm.
80% of Australian addresses covered and you probably already know if you're in the network.
How can I track my order?
When we ship your order (which we do daily), we send you a tracking link.
If you haven't received a tracking link, please email us on help@littlebird.com.au .
How do I contact customer service?
You can call us on 1300 240 817 or email help@littlebird.com.au .
Do you have a secure website?
Yes, our website is secure and we use the latest security features to ensure your data is always kept safe.
Can I get my order shipped to a PO Box or Parcel Locker?
If you want to ship to a PO Box, Parcel Locker or another otherwise anonymising delivery address, we need you to use Paypal at checkout.
- Choosing a selection results in a full page refresh.