Arduino Shields for Raspberry Pi B+/2B/3B

Introducing the Arduino Expansion Shield for Raspberry Pi B+! This amazing device is the perfect companion for your Raspberry Pi projects. Equipped with an ATmega32u4 Arduino Leonardo chip, it has 20 digital I/O and 6 analog I/O, and is compatible with all Arduino standard shields and sensors. Plus, it comes with a 5V system voltage and 16 GPIO pins on the Raspberry Pi B+. And don’t forget – it also comes with a 20cm micro USB cable and a CR1220 button cell!

For all your IOT AC control needs, the Arduino Expansion Shield for Raspberry Pi B+ also comes with an optional Relay Module V3.1. You can also monitor your pool water quality with the optional Analog pH Meter Kit. Plus, you can also use a SHT1x Humidity and Temperature Sensor, a motion sensor for security and human detection, or even a low cost LCD12864 display. And for robot building, you can also get a 2A Motor Shield or a Dual Bipolar Stepper Motor Shield. And to top it off, you can even get a GSM/GPRS and GPS Shield!

To make sure you get the most out of your purchase, the Arduino Expansion Shield for Raspberry Pi B+ also comes with a Wiki, Schematic, Assembly Drawing and a Beginner’s Guide to DIYing with the Raspberry Pi! So what are you waiting for? Get your very own Arduino Expansion Shield for Raspberry Pi B+ today.

Features:

• ATmega32u4 Arduino Leonardo Chip
• Compatible with all Arduino standard shields and sensors
• System voltage of 5V
• 20 digital I/O and 6 analog I/O
• 16 GPIO pins on the Raspberry Pi B+
• 20cm micro USB cable and CR1220 button cell included

Specifications:

• Dimension: 86mm x 61mm x 26mm (3.46" x 2.20" x 1.02")