Raspberry Pi Case with Clear Top
Low cost case for your Raspberry Pi 3Rated 5/5 based on 4 reviews.
- Designed to house the Raspberry Pi B+, Raspberry Pi 2, Raspberry Pi 3 and HAT PCBs
- HAT can be removed without removing the Raspberry Pi from the enclosure
- All cut-outs are pre-cut into the case
- Camera ribbon slot in enclosure lid
- Display ribbon slot in enclosure lid
- Label recess on enclosure base
- Gloss finish
For Use With: Raspberry Pi 3 B+, Raspberry Pi 2, Raspberry Pi B+ and HAT PCBs
- External Height: 26.6mm
- External Width: 63.9mm
- External Depth: 93.5mm
- Enclosure Material: ABS (Acrylonitrile Butadiene Styrene)
- Body Colour: Black
- Product Range: Raspberry Pi Style Enclosures
Tight fit on a good quality product.By: Aaron Were on 4 September 2018Make sure you fit the board into the base then slide into the top and attach the clear lid.
Useful Accessory5 May 2018The main challenge I found to be figuring out how to assemble it without jamming, which took several fumble fingered attempts. Injection molded product, good surface finish, clean fit. Transparent cover appeals as you can see status LEDs clearly during boot.
Fits perfectlyBy: Martin on 25 March 2018Used on my brand new Pi B Plus, fits nicely, and top cover makes it easy to access everything you need.
Versatile and multi-purposeBy: Scott Evans on 28 October 2017This case is well designed to give you the best options for your raspberry pi. The black lower section will take the model B+/pi2/p3 and the clear top has three slots to allow for the gpio, camera and display ribbon to exit the case while still allowing for the lid to clip on. For the application I'm using this case it's provides clear view of the hat status LED's to be seen clearly.